LX735 - 2X12 Signal Multiplexer

LX735 - 2X12 Signal Multiplexer

The LX735 multiplexer provides programmable routing of signals from different sources to different locations. This enables a reduced amount of test equipment to test a large number of different or multiple devices.

The LX735 utilizes double relay center ground switching along with individual 3-Axis shielding of all jacks and relays. All signal routing through the PC board utilizes planar coaxial shielding for very high isolation and reduced off-state leakage.

A variety of low cost adapter cables can be employed to enable connections for universal male/female or input/output configurations. Multiple units can be combined to produce a larger number of channels and buses.

Features
• Universal Inputs/Ouputs
• 12 Channel Inputs/Ouputs
• 2 Bus Inputs/Ouputs
• High Isolation 150dB
• Shielded Jacks & Relays
• Double Relay Switching
• Uses Low Cost Standard Cables
• Dual Color LED indicators
• High Density

Automated Digital Calibration

The LX735 does not contain any analog trim pots. Instead all calibrations and trimming are performed by automated computer controlled routines in a GPIB test system, with adjustments provided by digital trim DACs or digital constants. All calibrations are stored within the non-volatile flash memory of each module, and peformed with traceable equipment and standards. Accuracy is measured to better than 0.01dB or 0.1%, as applicable to each parameter. A calibration chart is included with each module to document the actual performance, parameters, and calibration results.