LX700 - GPIB Interface Option

LX700 - GPIB Installation

The LX700-GPIB Interface is provided as an optional user installable plugin which mounts in the left end of the chassis (shown below). The unit internally connects to the LX700 System Controller via an edge card connector, and requires only 8 screws to be removed/replaced by the user. The procedure typically requires 10 minutes and only requires a philips screwdriver.

LX700 - GPIB Specifications


• Electrical Connector	24 Pin Female Micro Ribbon

• Mechanical Locking	M3.5x0.6 Threaded Jacks

• Electrical Conformance	IEEE-488.1 Parameters

• Protocol Conformance	IEEE-488.2 Syntax

• Command Conformance	SCPI basics, plus Proprietary

• Maximum Data Rate	HS-488, 8MB/Sec

• LED Indicators	REMOTE, LISTEN, TALK, TRIGGER

• Interface Controller	NI-TNT4882

• Voltage Levels	TTL 5V

• Weight	0.2 lbs, 0.1kg

• Dimensions	H 3.5 In, W 1.8 In, D 4.3 In