 |
| |
| TS360
Stand Kit Assembly |
 |
The
stand kit is supplied and shipped unassembled. Assembly is simple
and requires only a #2 and or #3 Phillips screwdriver. All brackets
and rails have pre-punched holes and PEM nuts for quick and accurate
alignment. The kit contains:
• ( 2) U-Channel Rails with 10-32
PEM nuts, 56 x 2 x 1.5 In , 14ga Steel.
• ( 8) Triangular Brackets, 7 x
7 x 0.75 In, 14ga Steel.
• ( 8) 1/4-20x5/8 Phillips Machine
Screws, Sems w/ Split Lock Washers.
• (36) 10-32x1/2 Phillips Machine
Screws, Sems w/ Split Lock Washers.
• ( 6) 10-32 Keps nuts.
The stand attaches directly to the surface of the aluminum LT360 turntable
platter using four of the brackets and (8) 1/4-20 screws. The two
U channel rails are bolted together forming a square box pole using
(8) 10-32 screws. The pole is then bolted to the platter brackets
using (12) 10-32 screws.
The torque balancing bracket can be mounted in the middle of the pole
along one edge using (4) 10-32 screws. Two more brackets are attached
to the top of the pole using (6) 10-32 screws, and the last bracket
is mounted horizontally between the previous two brackets to form
a platform with (6) 10-32 screws and (6) Keps nuts.
• Finish Zinc Plate with Clear Chromate
• Weight 19 lbs (8.6kg) |
|
