Feburary 27, 2005
Tualatin, Oregon USA

The MC301 and MC501 are rugged microphone clips designed to fit 8mm & 12mm microphone bodies. The clips can be screwed directly on to the end of standard 5/8 Inch (16mm) microphone stands.

They feature all plastic construction with internal self threading ribs, and an interference fit over the mic stand tube. They feature a two piece base/holder design with a central pivot point for rotation.

The base and holder snap together with a multi blade design providing controlled friction. This allows the angle of the microphone to be rotated across 180 degrees (±90 Degrees minimum from the vertical position) to enable precision alignment and positioning.

The microphone easily snaps into the holder and can be removed as quickly. Constructed from high strength stable Lexan® Polycarbonate, it can withstand years of use with little or no change in its mechanical properties.

Features & Capabilities
• MC301 - Mounting for 8mm (0.315”) Diameter Mics
• MC501 - Mounting for 12mm (0.500”) Diameter Mics
• MC301 - Use with LinearX M30 Microphone Series
• MC501 - Use with LinearX M50 Microphone Series
• Microphone Snaps into Friction Fit Clip
• ±90 Degree Clip Rotation Angle
• Mounts on Standard 5/8 Inch Mic Stands
• Self Threading All Plastic Construction
• Heavy Duty Rugged Lexan® Material

###