- e-mailing graphs
- LMS 5 Upgrade
- Copy Curve Line Attributes
- Want LEAP5-type tab curve display
- TSL and LTD in LMS (4.50 build 331)
- File / Preferences
- Export Curve Data File
- LMS graph colors
- Makesplz
- LTD Model
- External calibration failed !
- LMS upgrade
- Minimum phase...
- Thielsmall
- impedance testing
- Remote desktop
- Library backup
- thiele small
- Re-install / upgrade
- Qtc from single Z curve?
- Level difference Gated vs Sin
- dB and Frequency
- Polar Macro?
- PDF export in LMS
- Using PAC-IV chassis with DB9-USB
- Phase measurement
- turntable recommendation
- RT60 measurement
- Drone Questions
- XOPT files
- saving new transducer LTD from LMS
- New motherboard?
- line input voltage max
- Mic cal curve
- Pink noise?
- Polar plots
- Imp measurement with different power level
- Curve Entry Limit
- Line limitation in a macro
- Macro curve naming and library path
- calibration failed
- Testing Super-Tweeters.
- Macro calling out another macro
- help
- Frequency indication in Analyzer
- Serial Number
- Which inductance to believe: LMS or B&K875A meter?
- Copy curve attributes
- Blips at 100, 1kHz, 10 kHz etc.
- Difference in levels
- Dual monitors with LMS
- PAC-IV w/ LMS-4 (windows)
- Lms5?
- Ease 3.0
- Delta mass
- Remote LMS operation.
- LMS 4 and Win XP
- LMS 4.5 versus LEAP 5.1
- What are the implications of < 25% fs shift for T/S Parameters?
- Macro execution speed ?!
- LMS Mic and Pink noise
- Polar SPL TTL pulses
- LMS Calibration
- Macro command to load mdf file for Line Input
- Bak file
- LMS measurements
- LMS Update
- small request
- Microphone measurements
- SPL measurements in a room.
- SPL measurements in a room.
- Qo parameter
- Generate dBI Curves
- Cone Resonant Modes
- Measuring Excursion
- Suggestions for the new LinearX analyzer:
- LMS measurements
- Lms Export
- Clibration problems
- Problem solved !!
- Data Splice Question
- Calibration problems...
- SPL mic input problem
- 70V Commercial products
- speaker parameters question
- Recomended Forum(s)
- Measuring driver offsets with LMS?
- Impedance phase
- horn transfer functions
- Capturing Angle Domain Curves
- Impedance curves at high powers
- Transducer Model VS Parameters
- How to LTD a Tweeter
- Measuring...
- MDF files
- polar Graphs
- Measuring Electrostatics
- Export curves to Excel
- Default Curve Width
- please help me how to upgrades lms4
- Various Questions
- Trying to LTD..
- what is the newest version of LMS?
- upgrade compatability
- Impedance measurement
- Pfar/Pnear Ratio
- change std. 360 points for the polar converter utility
- Polar frequencies not stored
- MIC file
- Macro Reference
- EASE Import
- bug
- LMS trouble - wrong results
- How to creat the LTD model with LMS4.5+VI BOX
- Circuit of a little amp for SPL measurements
- LMS-4 & Microsoft Vista
- Flatness In A Macro?
- Oscillator control in a MACRO
- Does the VIBOX.MAC macro perform a minimum-phase transform?
- Need ampllifier recommendation
- +90ยบ phase impedance
- Hafler amps
- death to my card ?? hope not.
- Acceleromter Calibration Data
- Repair Time?
- Thiel Small parameter testing
- pop noise when measuring
- Near Field Calc Util
- Display windows in LMS 4
- Environment noise effect
- Irregular loop test
- SPL calibration
- ReVC
- Gating overriding nulls
- Lms-5
- Calibration?
- WinXP update
- Setscp details
- Rab & Xab
- Tsl & Std
- Mmd
- Windows Vista
- on going board problems
- Port location
- Couple of suggests
- Open 2 files library in same graph
- PLotting Beamwidth vs Freq; Directivity vs Freq
- PLotting Beamwidth vs Freq; Directivity vs Freq
- LMS with strange datas
- LMS Card failing internal calibration
- non sine waves
- frequency response of Compression driver with horn?
- How to measure Rub & Buzz?
- Macro Command List
- How to measure THD in loudspeakers
- Impedance Spike Reading at 13.5khz
- Questions about gated SPL mesurement.
- Amplifier frequency response
- LMS Upgrade
- lms_ntd.sys
- Transfer funktion
- LMS impedance curve issue.
- unknown speaker parameters
- Hiss
- What is this LMS and how can I set it up?
- How to install without a floppy drive?
- Mic input loop test vs line-in
- LT360 integration with LMS
- LMS trade in & cost
- 64bit driver for lms-5
- LMS-5 Analyzer Upgrade/Exchange
- mic 31 with another system
- EConvert Error
- Move curves in LMS 4
- Problem in freuency response
- summing frequency response
- Full PA measures
- Cone area of PA speakers
- Vas
- Tape response measurment
- LMS with Industrial Motherboard